Copy of User Information
SAFETY CONSIDERATION
Caution: Read this user information carefully before using your new Uniform. The information is intended to familiarize the wearer of the abilities and limitations of the Uniform to minimize risk from a thermal exposure/Arc Flash. It is your responsibility to be familiar with the provided information, so that your Uniform will provide the intended level of protection.
LIMITATIONS OF USE
Our FR Uniforms are constructed with fabric that is self-extinguishing by removal from source and hereby provides a few seconds to react to an accidental exposure. The Uniforms are not designed for extended exposure to flame or heat or for exposure to welding, chemicals, hot liquids or steam. The Uniforms should also not be used for firefighting, wildfire fighting or other activities involving flame or heat. The Uniforms may lose the Fire Retandant properties if not maintained in accordance with manufacturer’s care and clean instructions found inside the Uniforms.
SIZING/ADJUSTMENTS
Please make sure that the Uniforms fit comfortably. If the Uniform is too small, it will restrict movement and increase the possibility of fabric or seam tearing. It is our recommendation to wash any Uniform prior to the initial use or any alternations.
KONTRA manufacture Uniforms according to the table below:
Pant Waist Measurement: Actual Waist Circumference (Inch).
Pant Inseam Measurement: Actual Inch measured from crotch to bottom leg
INSPECTION FREQUENCY AND DETAILS
It is good practice to examine all Fire Retardant Uniforms before each use for soiling or other potential contamination. Inspect each Uniform from the following types of mechanical damages; hole, rip, cuts and open seams that create potential exposure to the skin. Confirm the functionality of closures like zippers snap buttons etc.
If any component of the Uniform is found to be damaged or missing, remove the Uniform from service and have it repaired or replaced. It is the end user’s responsibility to make the determinations on when the Uniform should be removed from service.
WARRANTY INFORMATIONS
We use and adhere to strict quality control standards to every Uniform. Since all Uniforms have a limited expected service life, KONTRA assumes no life span liability for garment that has been exposed to tearing and heavy-duty usage. If you are dissatisfied with your KONTRA Fire Retardant Uniform, for any reason, please reach out to our customer service team email: customerservice@KONTRA-LLC.com
DRESSING/WEARING
Always inspect Uniforms before wearing and ensure selected Uniforms will cover both the upper and lower body. Avoid any flammable/synthetic base layers as those may melt during an accident. Ensure sleeves are rolled down.. Base layers and 1st layer Uniform such as T-shirt should be tucked in fully, to protect the wearer from thermal exposure.
PROPER USE CONSISTENT WITH NFPA 2113
NFPA 2113 standard provides instructions regarding the selection care use and maintenance requirements for Fire Retardant Uniforms for use by the industrial personal in areas at risk from short duration thermal exposures. Follow the provisions in this document to promote correct selection of protective Uniforms and reduced risk caused by incorrect maintenance, contamination or damage.
MARKING RECOMMENDATIONS
Adding non-Fire Retardant logos or name tags ,screen-print, or embroidery may be considered, but should be of limited size due to a risk of burn caused by a buildup of moisture (sweat) behind them. Consequently, logos are recommended to be smaller in size (less than 16 square inches for a single logo and less than 40 square inches for a whole garment). The current OSHA Rule 1910.269 for FR and Arc Rated Uniforms does not require the use of Fire Retardant thread for embroideries. KONTRA does provide product customization services. Please contact our representative for information on these services.
RECOMMENDED STORAGE PRACTICES:
Do not store Fire Retardant Uniforms in direct sunlight. Ensure Fire Retardant Uniforms are clean and dry before long term storage. Moist storage will promote the growth of mold and mildew, which may permanently damage your Uniforms.
CLEANING INSTRUCTIONS AND PRECAUTIONS.
KONTRA Fire Retardant Uniforms will provide protection for the useful life of the garment provided recommended care instructions are followed. Fire Retardant Uniforms should be kept clean. New Fire Retardant Uniforms should be washed at least once prior to initial use. Fire Retardant Uniforms should be laundered with frequency to prevent build-up of contaminates, that would reduce the Fire Retardancy capabilities
KONTRA Fire Retardant Uniforms do not require special laundry detergents. Fabric softener can be used. KONTRA Fire Retardant Uniforms are designed for home laundering and should be washed and dried according to the temperature provided in the Uniform's care label.
Do not use bleach, as it will breakdown the bond between the fabric and the Fire Retardant treatment.
Fire Retardant Uniforms can be dry cleaned and ironed.
In case of heavy oil contamination remove Uniforms immediately and either wash, replace or dry clean the Uniforms.
Do not use the DEET on Fire Retardant Uniforms. DEET is highly flammable and will compromise the Fire Retardant effectiveness. Insect repellents should be applied to the body of the wearer only, and not to Fire Retardant Uniforms.
MAINTENANCE CRITERIA AND METHODS OF REPAIR
Fire Retardant Uniforms can be repaired, however repairs must be made with fabrics and sewing threads that have a minimum the same Fire Retardant properties as the original Uniform. Hence, KONTRA recommends that the Uniforms are not repaired, but retired.
RETIREMENT AND DISPOSAL.
Retire Uniforms with seem break or holes: Retire and replace Fire Retardant Uniforms that have been heavily soiled with flammable substances that cannot be removed by wash or cleaning.